Shop by Category
Electric Mandrel Spinners
Customizable Marvering System
Lampwork Bead Sets
Lampwork Bead Pairs
Lampwork Focal Beads
Lampwork Vessel Pendants
Big Hole Beads
Focal Bead Portfolio
Dragons and Characters Portfolio
Discs and Flowers Portfolio
Color Work Portfolio
Jewelry Portfolio Page
34x24mm, 44mm with topperLip 14mm, Neck 8mmAccents range from 6x12mm - 4x6mm138mm total length of setDepth 25mm
8x12mm - 4x7mmtotal length - 69mmhole size: 1.5mm
avg. bead size: 9x14mmtotal set length: 65mmhole size: 1.5mm
6x13mm - 5x8mmtotal set length - 63mmhole size - 1.5mm
Hole Size: 5mm
Hole Size: 2.5mmBead Size: 22x26x13mm
Hole Size: 2mmBead Size: 44x18mm
Hole Size: 1.5mmBead Size: 27x15mm
Hole Size: 5mmBead Size: 21x31x19mm
8x12mm - 4x8mm, center is 13mm x 13mmtotal length = 84mmhole size: 1.5mm
This bead set is made with Transparent Green and Silvered Ivory Glass. This is a set of 23 Green and Silvered Ivory beads. Clear layering gives these beads a lot of visual depth. It includes 11 matched pairs and tapers gently.
Center is 6mm x 13mm -- The rest taper from 8mm x 13mm to 3mm x 6mm
Total length = 134mm
The holes are 1.5mm in diameter
My beads are properly annealed and cleaned with a diamond reamer.
Artist - Scott Bouwens
Total Height = 85mm (3 1/4")
Vase is 52mm x 23mm at the base
Interior is 9mm x 22mm deep
Includes 8 tulips and 4 foliage pieces
You can switch out the red for another color if you wish
Total Height = 90mm (3 1/2")
Vase is 42mm x 22mm at the base
Interior is 9mm x 25mm deep
Includes 10 tulips and 5 foliage pieces
This vase has a stemmed foot and a bulbous bottom section. With that extra room inside it would be able to hold enough water for actual flowers - If they're small of course.
Total Height = 88mm (3 1/2")
V ase is 51mm x 23mm at the base
You can switch out this color for another color if you wish
This keychain features a sturdy cylinder which make for a great and little decorative handle. Hang it out side you pocket for a little flair - or not.
This is a pretty good size lentil bead from My Galaxy Bead Line. It is double stung in SoftFlex wire for extra strength and durability. It measures 29mm x 32mm x 14mm thick. The total length is 88mm.
This Keychain features a good size lentil shaped bead from my Galaxy Bead line. It measures 25mm x 31mm x 15mm thick. The total length is 85mm as measured from the ring through to the other end.
This Bracelet features beads from My Galaxy Bead Line. The colors you see are actually crystals grown right on the surface of the bead. It is a technique I developed years ago. The Bracelet wears at 7.07" or 180mm The beads range from 9mm x 13mm to 3mm x 11mm The whole bracelet is well balanced in weight so it wears well and doesn't drop a heavy side down to reveal the clasp all the time.
These earrings hang from Gold-fill Lever-backs to keep your earrings in your ears. They are made with fine silver incorporated into the beads which can produce these great blue colors.
These earrrings are made with red and light green glass with Silvered Ivory. They hang from Sterling leverbacks which are hypoallergenic and secure your earrings well. The beads measure 7mm x 13mm and the earrings are 35mm from the top of the ear wire to the bottom of the dangle.
This Keychain is made with a conical Lampwork bead striped in Ivory and Silvered Blue glass. It measures 36mm x 16mm and is 9mm at the small end. Total length is 81mm as measured from the. Ring through to the other end.
This set of 7 beads is from my colored Space Gem bead line. It includes three matched pairs. The earthy coloring comes from crystallized Silver. The green glass takes on a great earthy hue when used with this technique. The designs you see repeat around the circumference of each bead. My beads are properly annealed and cleaned with a diamond reamer.
Center bead 10mm x 14mm
Pairs - 9mm x 13mm, 9mm x13mm, and 7mm x 11mm.
Set Length = 62mm
My Steady Boom with the Hypotenuse Brace
MY STEADY BOOM IS CURRENTLY BUILT TO ORDER This will be changing very soon as I am now "Live" with my Kickstarter Project. There are a few Made to order units still available through this website. However, once they are gone your only option will be to back the Kickstarter or wait till it is complete and I am in regular production.
The Kickstarter project is intended to help me start the first production run, complete with the packaging necessary to bring My Steady Boom to a wider marketplace.
Those who get the last of the Made to order units will get their My Steady Boom in time for this Chrismas, but that window of oportunity is closing fast. I might announce that there are no more available for this year at any time!
My Steady Boom with Hypotenuse Brace - (Includes Accessories Pack)
Made for heavier cameras more versatility.